You’re cleaning up after a dinner party and notice some fresh, white heat stains on your dining room table—what can you do to remove them? Heat stains form when hot objects, like a casserole dish, cause the wood’s pores to expand and trap moisture and other debris. Thankfully, there are a variety of remedies to treat heat stains that don’t involve hauling your table to a stain removal expert. That’s why we’ve put together a handy list of ways to remove heat stains from wood using common household materials. If you’re ready to make your wood furniture look good as new, keep reading!
1. Reheat the stain with a hair dryer
Set your hair dryer on low heat and move the head around the stain. Check on the stain every 2 minutes to see your progress. Keep the hair dryer in constant motion around the stain to avoid damaging the finish and repeat as necessary, making sure not to use the hair dryer for more than 2 minutes at a time.
- As the wood reheats, its pores will re-expand and the hair dryer will evaporate the stain-causing moisture.
2. Iron the stain out
Place a cloth over the stain and heat your iron to its lowest setting. If your cloth is very thin, fold it once to protect the wood finish. Iron over the cloth to reheat and lift the stain, keeping the iron in constant motion so you don’t scorch the wood. Check the stain every minute or so, increasing your iron’s heat one level at a time until the stain begins to fade.
- Once the stain begins to lift, stop increasing the iron’s heat.
- This method may take around 10 minutes depending on the severity and size of the stain.
3. Apply toothpaste and baking soda
Mix white, non-gel toothpaste with baking soda and rub it over the stain. Use your fingers to apply the mixture in the same direction as the grain of the wood. Rub gently and let the mixture sit for a few minutes, then wipe it away with a clean cloth. Wipe again with a damp cloth and check to see if the stain is gone.
- Repeat this process until the stain is completely lifted out of the wood. Once it’s gone, wipe the table dry with a clean cloth.
- Make sure to use non-gel toothpaste since it’s the least abrasive type. Look for the simplest toothpaste with the fewest ingredients you can find.
4. Rub the stain with mayonnaise or petroleum jelly
Oily substances like mayo can penetrate the wood and absorb the stain. Add a thick dab of mayo or petroleum jelly to a clean cloth and rub it into the stain in a circular motion. Cover the entire stain (add another dab if needed) and let it sit for at least a few minutes. Wipe the mayo or jelly away with a clean cloth to check the stain.
- Once the stain is gone, wipe down the table with a damp cloth to remove excess mayo or jelly.
- For old, stubborn stains, let the mayo or jelly sit for several hours (or even overnight if needed).
- Repeat this process until the stain is fully gone.
5. Scrub the stain with fine-grade steel wool and olive oil
Soak the steel wool in oil before rubbing it on your wood finish. Scrub gently back and forth along the grain of the wood, pausing every minute or so to check if the stain is lifting. Remove excess oil with a clean cloth and repeat until the stain is gone.
- Try mixing your oil with a few drops of liquid dish soap for a stronger clean.
- Rub with a light touch to avoid damaging the finish of the wood. If you notice little scratches, buff out the spot afterward to restore the finish.
- Alternatively, try vegetable or lemon oil.
6. Scour the stain with equal parts white vinegar and oil
Mix the vinegar and oil in a bowl and soak a clean cloth in the solution. Rub the stain vigorously until it’s gone, then wipe the mixture away with a different clean cloth. Use any oil you have available—olive, lemon, vegetable, or mineral oil are all effective at lifting wood stains.
- Repeat as much as needed to remove the stain fully.
- A combination of vinegar and oil is thicker and more effective than plain vinegar by itself (although it is possible to lift the stain without oil).
- Keep distilled, white vinegar handy in your cleaning supplies cabinet—it’s useful for removing a variety of stains from lots of different surfaces!
7. Absorb the stain with a salt paste
Combine 1 teaspoon (5.7 g) of salt with a few drops of water or oil. Use a clean cloth or sponge to rub the paste-like mixture into the stain using circular motions. Keep rubbing until the white spots have disappeared, then wipe the wood clean with a different cloth.
- Salt is a natural abrasive that will buff the whiteness out as well as absorb the moisture that caused the stain in the first place.
- Consider adding some furniture polish to the area afterward to restore the shine.
If nothing works, consult a professional to avoid damaging your wood. There are lots of factors that impact your success, like whether the wood is soft or hard, how thin the finish is, and how deep or old the stain is. A professional wood restoration or furniture expert will know how to safely remove the stain from your specific wood to make it look as good as new.
